Effects Of Errors On Scripts - Keithley 2450 Reference Manual

Section 2: General operation
The options available on this tab are described in the table below.
Settings tab settings
Show Warning
Show Information
Log Warning
Log Information
Log Command
Save to USB
Clear Log

Effects of errors on scripts

Most errors will not abort a running script. The only time a script is aborted is when a Lua run-time
error (event code -286, "TSP runtime error") is detected. Run-time errors are caused by actions such
as trying to index into a variable that is not a table.
Syntax errors (event code -285, "Program syntax") in a script or command will prevent execution of
the script or command.
2-118
Model 2450 Interactive SourceMeter® Instrument Reference Manual
Description
Turns the logging of warnings on or off. If you turn this off, the
instrument continues to record warning and display messages for
them, but does not display them in the System Events tab.
Turns the logging of information messages on or off. If you turn
this off, the instrument continues to record information messages
and display messages for them, but does not display them in the
System Events tab.
Turns the logging of warnings on or off. If this is turned off, the
instrument will not log or display messages for warnings.
Turns the logging of information messages on or off. If this is
turned off, the instrument will not log or display messages for
information messages.
Turns the logging of commands on or off. When this is turned on,
the instrument records the commands that are sent to the
instrument. It records commands sent from any interface (the front
panel or remote interface).
Saves the event log to a .csv file on the flash drive. The filename is
eventlog.csv.
Clear all entries from the event log.
2450-901-01 Rev. B/September 2013