Timer.cleartime() - Keithley 2450 Reference Manual

Model 2450 Interactive SourceMeter® Instrument Reference Manual

timer.cleartime()

This function resets the timer to zero (0) seconds.
Type TSP-Link accessible
Function No
Usage
timer.cleartime()
Example
timer.cleartime()
delay(3)
print(timer.gettime())
Also see
timer.gettime()
timer.gettime()
This function measures the elapsed time since the timer was last cleared.
Type TSP-Link accessible
Function No
Usage
time = timer.gettime()
time
Example 1
timer.cleartime()
delay(3)
print(timer.gettime())
Also see
timer.cleartime()
2450-901-01 Rev. B/September 2013
Affected by
(on page 8-165)
Affected by
The elapsed time in seconds (1 µs resolution)
(on page 8-165)
Section 8: TSP command reference
Where saved Default value
Where saved Default value
8-165