Section 6: SCPI command reference
:DISPlay:LIGHt:STATe
This command sets the brightness of the front-panel display.
Type
Command and query
Usage
:DISPlay:LIGHt:STATe <brightness>
:DISPlay:LIGHt:STATe?
<brightness>
Details
This command determines the brightness of the front-panel display.
Screen life is affected by how long the screen is on at full brightness. The higher the brightness
setting and the longer the screen is bright, the shorter the screen life.
Example
DISP:LIGH:STAT ON50
Also see
None
6-24
Model 2450 Interactive SourceMeter® Instrument Reference Manual
Affected by
The brightness of the display:
100%: ON100
•
75%: ON75
•
50%: ON50
•
25%: ON25
•
Display off: OFF
•
Display and all indicators off: BLACkout
•
Where saved
Set the display brightness to 50%
2450-901-01 Rev. B/September 2013
Default value
ON75