Model 2450 Interactive SourceMeter® Instrument Reference Manual
Model 2400 command
Model 2450 command
Notes
Model 2400 command
Model 2450 command
Notes
Model 2400 command
Model 2450 command
Notes
Model 2400 command
Model 2450 command
Notes
Model 2400 command
Model 2450 command
Notes
Model 2400 command
Model 2450 command
Notes
Model 2400 command
Model 2450 command
Notes
Model 2400 command
Model 2450 command
Notes
Model 2400 command
Model 2450 command
Notes
Model 2400 command
Model 2450 command
Notes
2450-901-01 Rev. B/September 2013
[:SENSe[1]]:DATA[:LATest]?
Not available
Retrieve buffers instead; see
[:SENSe[1]]:FUNCtion:CONCurrent
[:SENSe[1]]:FUNCtion:CONCurrent?
Not available
To do a similar action, set
:SOURce[1]:<function>:READ:BACK
and store both a measure and source values in the reading buffer.
[:SENSe[1]]:FUNCtion:OFF
[:SENSe[1]]:FUNCtion:OFF?
Not available
Only one measurement function is active at a time.
[:SENSe[1]]:FUNCtion:OFF:ALL
Not available
Only one measurement function is active at a time.
[:SENSe[1]]:FUNCtion:OFF:COUNt?
Not available
Only one measurement function is active at a time.
[:SENSe[1]]:FUNCtion[:ON]
[:SENSe[1]]:FUNCtion[:ON]?
[:SENSe[1]]:FUNCtion[:ON]
[:SENSe[1]]:FUNCtion[:ON]?
Does not support a list parameter in the Model 2450
[:SENSe[1]]:FUNCtion[:ON]:ALL
Not available
Only one measurement function is active at a time.
[:SENSe[1]]:FUNCtion[:ON]:COUNt?
Not available
Only one measurement function is active at a time.
[:SENSe[1]]:FUNCtion:STATe?
[:SENSe[1]]:FUNCtion[:ON]?
Only one measurement function is active at a time.
[:SENSe[1]]:FUNCtion[:ON]? queries the active measurement function.
[:SENSe[1]]:RESistance:HOLDoff
[:SENSe[1]]:RESistance:HOLDoff?
Not available
Appendix D: Model 2450 in a Model 2400 application
TRACe subsystem
(on page 6-107).
(on page 6-49)
(on page 6-77)
D-15