Keithley 2450 Reference Manual page 39

Section 2: General operation Model 2450 Interactive SourceMeter® Instrument Reference Manual
STATISTICS swipe screen
The STATISTICS swipe screen contains information about the state of the active buffer and the
readings in it. You can also use the Clear Stats button on this screen to clear the data used in the
statistics calculation.
Figure 6: STATISTICS swipe screen
USER DISPLAY swipe screen
You can program custom text that will appear on the USER DISPLAY swipe screen. For example,
you can program the Model 2450 to show statistics from a source-measure test. For details about
using remote commands to program the display, see Customizing a message for the User Display
screen (on page 2-38).
Figure 7: Example of user-defined text on the USER DISPLAY screen
DATA TREND swipe screen
The DATA TREND swipe screen shows a graphical representation of the readings in the presently
selected buffer.
Figure 8: DATA TREND swipe screen
For a larger view of the graph and to access graph settings, swipe the DATA TREND screen in an
upward motion. This opens up the Graph tab (also accessible by pressing the MENU key and
selecting Graph under Views).
2-12 2450-901-01 Rev. B/September 2013