Node[N].Execute(); Node[N].Getglobal() - Keithley 2450 Reference Manual

Model 2450 Interactive SourceMeter® Instrument Reference Manual

node[N].execute()

This function starts test scripts on a remote TSP-Link node.
Type TSP-Link accessible
Function Yes (see Details)
Usage
node[N].execute(scriptCode)
N
scriptCode
Details
This command is only applicable to TSP-Link systems. You can use this command to use the remote master
node to run a script on the specified node. This function does not run test scripts on the master node; only on the
subordinate node when initiated by the master node.
This function may only be called when the group number of the node is different than the node of the master.
This function does not wait for the script to finish execution.
Example 1
node[2].execute(sourcecode)
Example 2
node[3].execute("x = 5")
Example 3
node[32].execute(TestDut.source)
Also see
tsplink.group

node[N].getglobal()

This function returns the value of a global variable.
Type TSP-Link accessible
Function Yes
Usage
value = node[N].getglobal(name)
value
N
name
2450-901-01 Rev. B/September 2013
Affected by
The node number of this instrument (1 to 64)
A string containing the source code
(on page 8-230)
Affected by
The value of the variable
The node number of this instrument (1 to 64)
The global variable name
Section 8: TSP command reference
Where saved Default value
Runs script code on node 2. The code is in a string variable
called sourcecode.
Runs script code in string constant ("x = 5") to set x
equal to 5 on node 3.
Runs the test script stored in the variable TestDut
(previously stored on the master node) on node 32.
Where saved Default value
8-75