Localnode.access - Keithley 2450 Reference Manual

Interactive sourcemeter instrument
Table of Contents

Advertisement

Section 8: TSP command reference

localnode.access

This attribute contains the type of access users have to the instrument through different interfaces.
Type
TSP-Link accessible
Attribute (RW)
Yes
Usage
accessType = localnode.access
localnode.access = accessType
accessType
Details
When access is set to full, the instrument accepts commands from any interface with no passwords required.
When access is set to exclusive, you must log out of one remote interface and log into another one to change
interfaces. To use another interface, log out of the present interface before logging into the new interface. You do
not need a password with this access.
Protected access is similar to exclusive access, except that you must enter a password when logging in.
When the access is set to locked out, a password is required to change interfaces, including the front panel
interface.
Under any access type, if a script is running on one interface when a command comes in from another interface,
the command is ignored and the message "Script running from another interface" occurs.
The command *idn? is permitted from any interface in all access types.
Example
localnode.access = localnode.ACCESS_FULL
login admin
logout
Also see
localnode.password
8-68
Model 2450 Interactive SourceMeter® Instrument Reference Manual
Affected by
Not applicable
The type of access:
Full access for all users from all interfaces: localnode.ACCESS_FULL
Allows access by one remote interface at a time with logins required from
other interfaces: localnode.ACCESS_EXCLUSIVE
Allows access by one remote interface at a time with passwords required on
all interfaces: localnode.ACCESS_PROTECTED
Allows access by one interface (including the front panel) at a time with
passwords required on all interfaces: localnode.ACCESS_LOCKOUT
(on page 8-70)
Where saved
Default value
Nonvolatile
localnode.ACCESS_FULL
memory
Set the instrument access to locked out.
Log into the interface using the default
password.
Log out of the interface.
2450-901-01 Rev. B/September 2013

Advertisement

Table of Contents
loading

Table of Contents