Keithley 2450 Reference Manual page 849

Appendix D: Model 2450 in a Model 2400 application
Model 2400 command
Model 2450 command
Notes
Model 2400 command
Model 2450 command
Notes
Model 2400 command
Model 2450 command
Notes
Model 2400 command
Model 2450 command
Notes
Model 2400 command
Model 2450 command
Notes
Model 2400 command
Model 2450 command
Notes
Model 2400 command
Model 2450 command
Notes
Model 2400 command
Model 2450 command
Notes
CALCulate2 subsystem
Model 2400 command
Model 2450 command
Notes
D-6
Model 2450 Interactive SourceMeter® Instrument Reference Manual
:CALCulate[1]:DATA:LATest?
Not supported
Use buffer to get user math data; see the
:CALCulate[1]:MATH[:EXPression]:CATalog?
Not available
:CALCulate[1]:MATH[:EXPRession][:DEFine]
Not available
:CALCulate[1]:MATH[:EXPRession]:DELete:ALL
Not available
:CALCulate[1]:MATH[:EXPRession]:DELete[:SELected]
Not available
:CALCulate[1]:MATH[:EXPression]:NAME
:CALCulate[1]:MATH[:EXPression]:NAME?
POWER: [:SENSe[1]]:<function>:UNIT
VOLTage or CURRent and the setting is WATT
OFFCOMPOHM, VOLTCOEFF, and VARALPHA are not available
:CALCulate[1]:STATe
:CALCulate[1]:STATe?
:CALCulate[1]:<function>:MATH:STATe
VOLTage[:DC], CURRent[:DC], or RESistance
:CALCulate[1]:<function>:MATH:STATe?
If you send :CALCulate[1]:STATe, it will set the math state for all functions.
If you send :CALCulate[1]:STATe?, a header error occurs.
:CALCulate[1]:MATH:UNITs
:CALCulate[1]:MATH:UNITs?
Not available
:CALCulate2:CLIMits:BCONtrol
:CALCulate2:CLIMits:BCONtrol?
Not available
TRACe subsystem (on page 6-107).
(on page 6-59), where <function> is
(on page 6-12), where <function> is
2450-901-01 Rev. B/September 2013