Display Subsystem; Display:clear - Keithley 2450 Reference Manual

Section 6: SCPI command reference

DISPlay subsystem

This subsystem contains commands that control the front-panel display.

:DISPlay:CLEar

This command clears the front-panel User Display swipe screen.
Type
Command
Usage
:DISPlay:CLEar
Details
This command clears the User Display screen.
If there are active scripts running, there might be a delay before the screen clears. The screen is cleared as soon
as processing time becomes available.
Example
DISP:CLE
DISP:SCR USER
DISP:USER1:TEXT "Batch A122"
DISP:USER2:TEXT "Test running"
Also see
:DISPlay:USER<n>:TEXT[:DATA]
6-22
Model 2450 Interactive SourceMeter® Instrument Reference Manual
Affected by
Not applicable
(on page 6-27)
Where saved
Not applicable
Clear the User Display screen and switch to
display the User Display screen.
Set the first line to read "Batch A122" and
the second line to display "Test running".
2450-901-01 Rev. B/September 2013
Default value
Not applicable