Tspnet.execute() - Keithley 2450 Reference Manual

Model 2450 Interactive SourceMeter® Instrument Reference Manual
Example
testID = tspnet.connect("192.0.2.0")
-- Use the connection
tspnet.disconnect(testID)
Also see
tspnet.connect()

tspnet.execute()

This function sends a command string to the remote device.
Type TSP-Link accessible
Function No
Usage
tspnet.execute(connectionID, commandString)
value1 = tspnet.execute(connectionID, commandString, formatString)
value1, value2 = tspnet.execute(connectionID, commandString, formatString)
value1, ..., valuen = tspnet.execute(connectionID, commandString, formatString)
connectionID
commandString
value1
value2
valuen
...
formatString
2450-901-01 Rev. B/September 2013
(on page 8-237)
Affected by
The connection ID returned from tspnet.connect()
The command to send to the remote device
The first value decoded from the response message
The second value decoded from the response message
The nth value decoded from the response message; there is one return value for
each format specifier in the format string
One or more values separated with commas
Format string for the output
Section 8: TSP command reference
Create a TSP-Net session.
Close the session.
Where saved Default value
8-239