Keithley 2450 Reference Manual page 866

Model 2450 Interactive SourceMeter® Instrument Reference Manual
Model 2400 command
Model 2450 command
Notes
Model 2400 command
Model 2450 command
Notes
Model 2400 command
Model 2450 command
Notes
Model 2400 command
Model 2450 command
Notes
Model 2400 command
Model 2450 command
Notes
Model 2400 command
Model 2450 command
Notes
Model 2400 command
Model 2450 command
Notes
Model 2400 command
Model 2450 command
Notes
Model 2400 command
Model 2450 command
Notes
Model 2400 command
Model 2450 command
Notes
2450-901-01 Rev. B/September 2013
:STATus:MEASurement:ENABle
:STATus:MEASurement:ENABle?
Not available
Use the questionable register to emulate this register; see the
subsystem (on page 6-89) for information.
:STATus:MEASurement[:EVENt]?
Not available
Use the questionable register to emulate this register; see the
subsystem (on page 6-89) for information.
:STATus:OPERation:CONDition?
:STATus:OPERation:CONDition?
In the Model 2450, you need to map events into the register (there are no set
bits). See Status model (on page C-1) for information.
:STATus:OPERation:ENABle
:STATus:OPERation:ENABle?
:STATus:OPERation:ENABle
:STATus:OPERation:ENABle?
In the Model 2450, you need to map events into the register (there are no set
bits). See Status model (on page C-1) for information.
:STATus:OPERation[:EVENt]?
:STATus:OPERation[:EVENt]?
In the Model 2450, you need to map events into the register (there are no set
bits). See Status model (on page C-1) for information.
:STATus:PRESet
:STATus:PRESet (on page 6-92)
:STATus:QUEStionable:CONDition?
:STATus:QUEStionable:CONDition?
In the Model 2450, you need to map events into the register (there are no set
bits). See Status model (on page C-1) for information.
:STATus:QUEStionable:ENABle
:STATus:QUEStionable:ENABle?
:STATus:QUEStionable:ENABle
:STATus:QUEStionable:ENABle?
In the Model 2450, you need to map events into the register (there are no set
bits). See Status model (on page C-1) for information.
:STATus:QUEStionable[:EVENt]?
:STATus:QUEStionable[:EVENt]?
In the Model 2450, you need to map events into the register (there are no set
bits). See Status model (on page C-1) for information.
:STATus:QUEue:CLEar
Not available
Use the event log; see Using the event log
Appendix D: Model 2450 in a Model 2400 application
(on page 6-89)
(on page 6-89)
(on page 6-90)
(on page 6-92)
(on page 6-93)
(on page 6-93)
(on page 2-117).
STATus
STATus
D-23