Keithley 2450 Reference Manual page 30

Model 2450 Interactive SourceMeter® Instrument Reference Manual
EXIT key
FUNCTION key
TRIGGER key
OUTPUT ON/OFF
switch
REMOTE LED
indicator
LAN LED indicator
1588 LED indicator
INTERLOCK LED
indicator
Sense terminals
2450-901-01 Rev. B/September 2013
Press the EXIT key to return to the previous screen or close a
dialog box. For example, press the EXIT key when the main menu
page is displayed to return to the home screen. When you are
viewing a subscreen (for example, the Event Log screen), press
the EXIT key to return to the main menu screen.
Press the FUNCTION key to display instrument functions. To
select one of the functions, press the function on the touch
screen. Alternatively, turn the navigation control to highlight a
function, and then press the control to select the function.
The TRIGGER key provides access to trigger-related settings and
operations. Pressing the TRIGGER key results in different
actions, depending on the instrument state. For details, see
Switching between measurement methods
Press the OUTPUT ON/OFF switch to turn on the source output;
the key illuminates when the source output is on. Press the
OUTPUT ON/OFF switch again to turn off the source output.
Illuminates when the instrument is controlled through a remote
interface.
Illuminates when the instrument is connected to a local area network
(LAN).
Illuminates when the instrument is connected to an IEEE-1588
compliant device.
Illuminates when the interlock is enabled.
Use SENSE HI and SENSE LO terminal connections to measure
voltage at the device under test (DUT). Using sense leads gives
you more accurate voltage sourcing and measurement at the
DUT, because measurement of the voltage drop across the force
leads is eliminated.
Section 2: General operation
(on page 3-92).
2-3