Model 2450 Interactive SourceMeter® Instrument Reference Manual
smu.source.configlist.create()
This command creates an empty source configuration list for sourcing.
Type
TSP-Link accessible
Function
Yes
Usage
smu.source.configlist.create(listName)
listName
Details
This command creates an empty configuration list. To add configuration points to this list, you need to use the
store command.
Configuration lists are not saved when the instrument is turned off. If you want to save a configuration list through
a power cycle, create a configuration script to save instrument settings, including any defined configuration lists.
Example
reset()
smu.source.configlist.create("MyScrList")
print(smu.source.configlist.catalog())
print(smu.source.configlist.catalog())
smu.source.configlist.store("MyScrList")
smu.source.configlist.store("MyScrList")
print(smu.source.configlist.size("MyScrList"))
Also see
Configuration lists
smu.source.configlist.store()
2450-901-01 Rev. B/September 2013
Affected by
Restore configuration
Instrument reset
Power cycle
Source configuration list
A string that represents the name of a source configuration list
(on page 3-33)
(on page 8-132)
Section 8: TSP command reference
Where saved
Default value
Configuration script
Create a source configuration list
named MyScrLst.
Print the name of one configuration list
stored in volatile memory.
Output:
MyScrList
Print the name of one configuration list.
Output:
nil
Nil indicates that no more configuration
lists are stored.
Store a configuration point in
MyScrList.
Store a configuration point in
MyScrList.
Print the number of configuration points
in MyScrList.
Output:
2
8-129