Keithley 2450 Reference Manual page 511

Section 7: Introduction to TSP operation
Example: If and else
x = 2
if not x then
print("This is from the if block")
else
print("This is from the else block")
end
Example: Else and elseif
x = 1
y = 2
if x and y then
print("'if' expression 2 was not false.")
end
if x or y then
print("'if' expression 3 was not false.")
end
if not x then
print("'if' expression 4 was not false.")
else
print("'if' expression 4 was false.")
end
if x == 10 then
print("x = 10")
elseif y > 2 then
print("y > 2")
else
print("x is not equal to 10, and y is not greater than 2.")
end
Output:
'if' expression 2 was not false.
'if' expression 3 was not false.
'if' expression 4 was false.
x is not equal to 10, and y is not greater than 2.
\
7-20
Model 2450 Interactive SourceMeter® Instrument Reference Manual
Output:
This is from the else
block
2450-901-01 Rev. B/September 2013