Trace:save - Keithley 2450 Reference Manual

Section 6: SCPI command reference

:TRACe:SAVE

This command saves data from the specified reading buffer to a USB flash drive.
Type
Command only
Usage
:TRACe:SAVE <fileName>, <bufferName>
:TRACe:SAVE <fileName>, <bufferName>, <timeFormat>
:TRACe:SAVE <fileName>, <bufferName>, <timeFormat>, <start>, <end>
<fileName>
<bufferName>
<timeFormat>
<start>
<end>
6-116
Model 2450 Interactive SourceMeter® Instrument Reference Manual
Affected by
Not applicable
A string that indicates the name of the file on the USB flash drive in which to save
the reading buffer
A string that indicates the reading buffer; the default buffers (defbuffer1 or
defbuffer2) or the name of a user-defined buffer; if no buffer is specified, this
parameter defaults to defbuffer1
Defines how date and time information from the buffer is saved in the file on the
USB flash drive; the values are:
Dates, times, and fractional seconds are saved; the default value: FORMat
•
Relative time stamps are saved: RELative
•
Seconds and fractional seconds are saved: RAW
•
Time stamps are saved: STAMp
•
Defines the starting point in the buffer to start saving data
Defines the ending point in the buffer to stop saving data
Where saved
Not applicable
2450-901-01 Rev. B/September 2013
Default value
Not applicable