Siemens SIMOVERT MASTERDRIVES Manual page 1278

Parameter Description
U369 Parameter for entering a fixed setpoint value for the
TeCntrFStpOutLim output limitation ramp-function generator of the
technology controller.
2369
U370* BICO parameter for selecting the connectors for the
S.TeCntrOutLim output limitation of the technology controller.
Index 1: Connector for upper output limitation (B+)
2370 Index 2: Connector for lower output limitation (B-)
U371 Parameter for entering the acceleration/deceleration time
TeCntrOutLimTime for the output limitation of the technology controller.
2371
n372 Visualization parameter, output of the technology
TeCntr Output controller after output limitation.
2372
U373* BICO parameter for selecting the connector from which
S.J_Ext the moment of inertia for torque pre-control is read in.
2373
U374* BICO parameter for selecting a connector from which the
S.AccPre acceleration for torque pre-control is read in.
2374
U375* BICO parameter for selecting a connector from which a
S.T FixVal fixed torque pre-control value is read in.
2375
U376* BICO parameter for selecting a binector from which the
S.Select J command to select a fixed (U378) or a variable moment of
inertia (U373) for torque pre-control is read in
2376
Siemens AG 6SE7087-6QX70 (Edition AG)
SIMOVERT MASTERDRIVES Compendium Motion Control
Data Read/write
Init: 100,0 Menus:
Min: 0,0 - Parameter menu
Max: 200,0 + Free blocks
Unit: % - Upread/free access
Indices: - Changeable in:
Type: I2 - Ready to switch on
index1: 586 Menus:
Unit: - - Parameter menu
Indices: 2 + Free blocks
Type: L2 ,K - Upread/free access
Changeable in:
- Ready to switch on
- Operation enabled
Init: 0,00 Menus:
Min: 0,00 - Parameter menu
Max: 100,00 + Free blocks
Unit: s - Upread/free access
Indices: - Changeable in:
Type: O2 - Ready to switch on
- Operation enabled
Dec.Plc.: 1 Menus:
Unit: % - Parameter menu
Indices: - + Free blocks
Type: I2 - Upread/free access
index1: 0 Menus:
Unit: - - Parameter menu
Indices: 2 + Control/gating unit
,BDS + Speed control
Type: L2 ,K - Upread/free access
Changeable in:
- Ready to switch on
- Operation enabled
index1: 0 Menus:
Unit: - - Parameter menu
Indices: 2 + Control/gating unit
,BDS + Speed control
Type: L2 ,K - Upread/free access
,K Changeable in:
- Ready to switch on
- Operation enabled
index1: 0 Menus:
Unit: - - Parameter menu
Indices: 2 + Control/gating unit
,BDS + Speed control
Type: L2 ,K - Upread/free access
Changeable in:
- Ready to switch on
- Operation enabled
index1: 0 Menus:
Unit: - - Parameter menu
Indices: 2 + Control/gating unit
,BDS + Speed control
Type: L2 ,B - Upread/free access
Changeable in:
- Ready to switch on
- Operation enabled
161