Siemens SIMOVERT MASTERDRIVES Manual page 1282

Parameter Description
U402* Parameter for selecting the double word connector for the
S.ConnAnaDE_2 2nd analog delay element
2402
U403* Parameter for entering the delay cycles of the 2nd analog
AnaDE_2_T delay element
2403
U404* Parameter array for selecting the binectors for the 6
S.SampTChange sampling time changeover contacts
2404
U405* Parameter for selecting the 32-bit connector for the high-
S.MulDiv32_1_32 resolution multiplier/divider 1 (2-word)
2405
U406* Parameter for selecting the 16-bit connectors for the high-
S.MulDiv32_1_16 resolution multiplier/divider 1 (2-word)
2406
U407* Parameter for selecting a connector as input for
S.PulsGen Tp determination of the period of the 1st pulse generator
2407
U408* Parameter array for selecting the double-word connectors
S.Integr32_1 for the 1st 32-bit integrator:
Index 1: Current input value
2408 Index 2: Upper limit
Index 3: Lower limit
Index 4: Set value
U409* Parameter for selecting the integral time constant for the
S.Integr32_1_t 1st 32-bit integrator.
2409
U410* Parameter for selecting a binector as setting command for
S.Integr32_1_s the 1st 32-bit integrator.
2410
Siemens AG 6SE7087-6QX70 (Edition AG)
SIMOVERT MASTERDRIVES Compendium Motion Control
Data Read/write
Init: 0 Menus:
Unit: - - Parameter menu
Indices: - + Free blocks
Type: L2 ,K - Upread/free access
,K Changeable in:
- Ready to switch on
- Operation enabled
Init: 0 Menus:
Min: 0 - Parameter menu
Max: 32 + Free blocks
Unit: - - Upread/free access
Indices: - Changeable in:
Type: O2 - Ready to switch on
- Operation enabled
index1: 0 Menus:
Unit: - - Parameter menu
Indices: 6 + Free blocks
Type: L2 ,B - Upread/free access
Changeable in:
- Ready to switch on
- Operation enabled
Init: 0 Menus:
Unit: - - Parameter menu
Indices: - + Free blocks
Type: L2 ,K - Upread/free access
,K Changeable in:
- Ready to switch on
- Operation enabled
index1: 0 Menus:
Unit: - - Parameter menu
Indices: 2 + Free blocks
Type: L2 ,K - Upread/free access
Changeable in:
- Ready to switch on
- Operation enabled
Init: 613 Menus:
Unit: - - Parameter menu
Indices: - + Free blocks
Type: L2 ,K - Upread/free access
Changeable in:
- Ready to switch on
- Operation enabled
index1: 0 Menus:
Unit: - - Parameter menu
Indices: 4 + Free blocks
Type: L2 ,K - Upread/free access
,K Changeable in:
- Ready to switch on
- Operation enabled
Init: 611 Menus:
Unit: - - Parameter menu
Indices: - + Free blocks
Type: L2 ,K - Upread/free access
Changeable in:
- Ready to switch on
- Operation enabled
Init: 0 Menus:
Unit: - - Parameter menu
Indices: - + Free blocks
Type: L2 ,B - Upread/free access
Changeable in:
- Ready to switch on
- Operation enabled
165