Siemens SIMOVERT MASTERDRIVES Manual page 1261

Parameter Description
U210* BICO parameter for selecting the binector for analog-
S.2 Store 1 signal storage 1 (2 word).
2210
U211* BICO parameter for selecting the connectors for analog-
S.1 Store 2 signal storage 2 (2 word).
2211
U212* BICO parameter for selecting the binector for analog-
S.2 Store 2 signal storage 2 (2 word).
2212
U214* BICO parameter for selecting the connector from which
S.n(FrictChar) the speed actual-value for the friction characteristic is to
be read in.
2214
U215* Parameter for indicating the speed support points (in %)
n-FrictChar of the friction characteristic. Only positive values are
acceptable.
2215
U216* Function parameter for entering the supplementary torque
T FrictChar values of the friction characteristic. Are automatically set
upon recording of the friction characteristic.
2216
U217* Weighting factor (in %) for the torque supplementary
Weight T Char value determined by the friction characteristic.
2217
U218* BICO parameter for selecting a binector for activating the
S.FricCharON friction characteristic.
2218
U219* BICO parameter for selecting a binector with which
S.PlotFricChar recording of the friction characteristic can be triggered.
2219
Siemens AG 6SE7087-6QX70 (Edition AG)
SIMOVERT MASTERDRIVES Compendium Motion Control
Data Read/write
Init: 0 Menus:
Unit: - - Parameter menu
Indices: - + Free blocks
Type: L2 ,B - Upread/free access
Changeable in:
- Ready to switch on
- Operation enabled
Init: 0 Menus:
Unit: - - Parameter menu
Indices: - + Free blocks
Type: L2 ,K - Upread/free access
,K Changeable in:
- Ready to switch on
- Operation enabled
Init: 0 Menus:
Unit: - - Parameter menu
Indices: - + Free blocks
Type: L2 ,B - Upread/free access
Changeable in:
- Ready to switch on
- Operation enabled
index1: 0 Menus:
Unit: - - Parameter menu
Indices: 2 + Functions
,BDS - Upread/free access
Type: L2 ,K Changeable in:
,K - Ready to switch on
- Operation enabled
index1: 1,000 Menus:
Min: 0,000 - Parameter menu
Max: 200,000 + Functions
Unit: % - Upread/free access
Indices: 10 Changeable in:
Type: I4 - Ready to switch on
index1: 0,0 Menus:
Min: 0,0 - Parameter menu
Max: 200,0 + Functions
Unit: % - Upread/free access
Indices: 10 Changeable in:
Type: I2 - Ready to switch on
index1: 100,0 Menus:
Min: 0,0 - Parameter menu
Max: 200,0 + Functions
Unit: % - Upread/free access
Indices: 4 Changeable in:
,FDS - Ready to switch on
Type: O2
index1: 0 Menus:
Unit: - - Parameter menu
Indices: 2 + Functions
,BDS - Upread/free access
Type: L2 ,B Changeable in:
- Ready to switch on
- Operation enabled
index1: 0 Menus:
Unit: - - Parameter menu
Indices: 2 - Upread/free access
,BDS Changeable in:
Type: L2 ,B - Ready to switch on
- Operation enabled
144