Siemens SIMOVERT MASTERDRIVES Manual page 1279

Parameter Description
U377* BICO parameter for selecting a binector from which the
S.Sel Acc T command to select a fixed (U375) is read in or from the
pre-control torque calculated from acceleration.
2377
U378* Parameter for indicating a fixed moment of inertia for the
J FixVal torque pre-control.
2378 Normialization
n_ref (P353)
------------------------------
m_ref (P354)
Thus the rated starting time is given in seconds.
U379* Parameter for indicating the scaling of the external
J / Scaling moments of inertia (U373)
2379
U380* BICO parameter for selecting the connector for the input
S.SimpRGen In of the simple ramp-function generator.
2380
U381* BICO parameter for selecting the binector for setting the
S.Set SimpRGen simple ramp-function generator.
2381
U382* BICO parameter for selecting the connector for the setting
S.SetVSimpRGen value of the simple ramp-function generator.
2382
U383 Parameter for entering the acceleration and deceleration
SimpRG Ac/DcTime time of the simple ramp-function generator.
Index 1: Acceleration time
2383 Index 2: Deceleration time
n384 Parameter is only necessary for the parameter model of
KPC PROFIdriveV PROFIdrive V3 standard. Parameter is only visible if
PROFIdrive V3 is set.
2384
Siemens AG 6SE7087-6QX70 (Edition AG)
SIMOVERT MASTERDRIVES Compendium Motion Control
Data Read/write
index1: 0 Menus:
Unit: - - Parameter menu
Indices: 2 + Control/gating unit
,BDS + Speed control
Type: L2 ,B - Upread/free access
Changeable in:
- Ready to switch on
- Operation enabled
Init: 0,00 Menus:
Min: 0,00 - Parameter menu
Max: 600,00 + Control/gating unit
Unit: s + Speed control
Indices: - - Upread/free access
Type: O2 Changeable in:
- Ready to switch on
- Operation enabled
Init: 100,00 Menus:
Min: 0,00 - Parameter menu
Max: 200,00 + Control/gating unit
Unit: % + Speed control
Indices: - - Upread/free access
Type: O2 Changeable in:
- Ready to switch on
- Operation enabled
Init: 0 Menus:
Unit: - - Parameter menu
Indices: - + Free blocks
Type: L2 ,K - Upread/free access
Changeable in:
- Ready to switch on
- Operation enabled
Init: 0 Menus:
Unit: - - Parameter menu
Indices: - + Free blocks
Type: L2 ,B - Upread/free access
Changeable in:
- Ready to switch on
- Operation enabled
Init: 0 Menus:
Unit: - - Parameter menu
Indices: - + Free blocks
Type: L2 ,K - Upread/free access
Changeable in:
- Ready to switch on
- Operation enabled
index1: 10,00 Menus:
Min: 0,00 - Parameter menu
Max: 100,00 + Free blocks
Unit: s - Upread/free access
Indices: 2 Changeable in:
Type: O2 - Ready to switch on
- Operation enabled
Dec.Plc.: 3 Menus:
Unit: 1/s - Parameter menu
Indices: - - Upread/free access
Type: O4 - Ready to switch on
162