0X6091/N Gear Ratio - BONFIGLIOLI Vectron Active Cube User Manual

12.5.35 0x6091/n Gear ratio

Index Sub-index
0x6091 0
1
2
Object works in:
• Motion Control:
All modes
o
Object 0x6091
revolutions.
Gear ratio
Parameter
=
Parameter
Writing to object
parameter
only!).
If object 0x6091/1 was written and then a save parameters command (object 0x1010)
processed, the object value is stored in non volatile memory.
After the next power on of the inverter, the previously set value is reactivated and
overwrites the setting of
Writing to object
parameter
only!).
If object 0x6091/2 was written and then a save parameters command (object 0x1010)
processed, the object value is stored in non volatile memory.
After the next power on of the inverter, the previously set value is reactivated and
overwrites the setting of parameter
Alternatively the parameters 1116 and 1117 can be used instead of the Objects.
0x6091/1
0x6091/2
04/13
Meaning
Highest sub-index supported
Motor shaft revolutions
Driving shaft revolutions
gear ratio
defines the ratio of motor shaft revolutions to driving shaft
motor shaft
0x6091/1
=
driving shaft
0x6091/2
Gear Box : Motor
Gear Box : Driving
motor shaft revolutions
Gear Box: Motor Shaft Revolutions
Gear Box: Motor shaft revolutions
driving shaft revolutions
Gear Box: Driving Shaft Revolutions
Object
Motor Shaft revolutions
Driving Shaft revolutions
CM-CAN ACU
Data type
Unsigned8
Unsigned32
Unsigned32
Object doesn't work in:
Non motion Control (conf. ≠ x40)
•
revolution s
revolution s
1117
Shaft Revolution s
1116
Shaft Revolution s
automatically generates a write command to
1117 (data set 5, all data sets in RAM
automatically generates a write command to
1116 (data set 5, all data sets in RAM
Gear Box: Driving Shaft Revolutions
1117
Gear Box: Motor Shaft Revolutions
1116
Gear Box: Driving Shaft Revolu-
tions
Access Map Def.-Val
ro No 2
rw No 1
rw No 1
1117.
1116.
Parameter
143