Figure 4.92 Qos > General > Dscp Mapping - Advantech EKI-7706 Series User Manual

Item
Queue to CoS Mapping
Queue
Class of Service
Apply
The ensuing table for CoS Mapping Information lists the following settings
(informational only):
CoS and Mapping to Queue
The ensuing table for Queue Mapping Information lists the following settings
(informational only):
Queue and Mapping to CoS
4.8.1.5 DSCP Mapping
The DSCP to Queue mapping function maps queue values in incoming packets to a
DSCP value that QoS uses internally to represent the priority of the traffic. The
following table shows the DSCP to Queue map.
If these values are not appropriate for your network, you need to modify them.
To access this page, click QoS > General > DSCP Mapping.
The following table describes the items in the previous figure.
Item
DSCP to Queue Mapping
DSCP
Queue
Queue to DSCP Mapping
Queue
DSCP
Apply
Description
Displays the queue entry for CoS mapping.
Click the drop-down menu to select the CoS type
Click Apply to save the values and update the screen.
Figure 4.92 QoS > General > DSCP Mapping
Description
Enter the DSCP entry to define the precedence values.
Click the drop-down menu to select the queue designation for the
DSCP value.
Displays the queue value for the DSCP map.
Enter the DSCP entry to define the precedence values.
Click Apply to save the values and update the screen.
96 EKI-7706 Series User Manual