Figure 4.156 Qos > General > Cos Mapping; Figure 4.157 Qos > General > Dscp Mapping - Advantech EKI-7720 Series User Manual

The following figure displays the Queue Mapping Information settings.
4.8.1.5 DSCP Mapping
The DSCP to Queue mapping function maps queue values in incoming packets to a
DSCP value that QoS uses internally to represent the priority of the traffic. The fol-
lowing table shows the DSCP to Queue map.
If these values are not appropriate for your network, you need to modify them.
To access this page, click QoS > General > DSCP Mapping.
The following table describes the items in the previous figure.
Item
DSCP to Queue Mapping
DSCP
Queue
Queue to DSCP Mapping
Queue
DSCP
Apply
The ensuing table for DSCP Mapping Information settings are informational only:
DSCP and Mapping to Queue.
The ensuing table for Queue Mapping Information settings are informational only:
Queue and Mapping to DSCP.
Figure 4.156 QoS > General > CoS Mapping
Figure 4.157 QoS > General > DSCP Mapping
Description
Enter the DSCP entry to define the precedence values.
Click the drop-down menu to select the queue designation for the
DSCP value.
Displays the queue value for the DSCP map.
Enter the DSCP entry to define the precedence values.
Click Apply to save the values and update the screen.
104 EKI-7720 Series User Manual