Figure 4.22 Port Dscp Configuration - Advantech EKI-8500 Series User Manual

The Port DSCP Configuration page displays.
The following table describes the items in the previous figure.
Item
Port
Ingress Translate
Ingress Classify
Egress
Save
Reset
4.3.4.8 DSCP-Based QoS
This function allows you to configure the basic QoS DSCP based QoS Ingress
Classification settings for all switches.
1. Navigate to Configuration > QoS and click DSCP-Based QoS.

Figure 4.22 Port DSCP Configuration

Description
Displays the port number of the entry.
Click to enable or disable (default) the Ingress Translation settings.
Click the drop-down menu to select the port classification. Options:
 Disable: No Ingress DSCP Classification
DSCP=0: Classify if incoming (or translated if enabled) DSCP is

0
 Selected: Classify only selected DSCP for which classification
is enabled as specified in DSCP Translation window for the
specific DSCP
All: Classify all DSCP

 Click the drop-down menu to set the egress rewriting setting.
Options:
Disable: No Egress rewrite.

 Enable: Rewrite enabled without remapping.
Remap: DSCP from analyzer is remapped and frame is

remarked with remapped DSCP value.
Click Save to save changes.
Click Reset to undo any changes made locally and revert to
previously saved values.
50 EKI-8500 Series User Manual