Figure 4.90 Qos > General > Dscp Mapping - Advantech EKI-7428 Series User Manual

Item
Queue
Class of Service
Apply
The ensuing table for CoS Mapping Information settings are informational only:
CoS and Mapping to Queue.
The ensuing table for Queue Mapping Information settings are informational only:
Queue and Mapping to CoS.
4.8.1.5 DSCP Mapping
The DSCP to Queue mapping function maps queue values in incoming packets to a
DSCP value that QoS uses internally to represent the priority of the traffic. The
following table shows the DSCP to Queue map.
If these values are not appropriate for your network, you need to modify them.
To access this page, click QoS > General > DSCP Mapping.
The following table describes the items in the previous figure.
Item
DSCP to Queue Mapping
DSCP
Queue
Queue to DSCP Mapping
Queue
DSCP
Apply
The ensuing table for DSCP Mapping Information settings are informational only:
DSCP and Mapping to Queue.
The ensuing table for Queue Mapping Information settings are informational only:
Queue and Mapping to DSCP.
EKI-7428 Series User Manual
Description
Displays the queue entry for CoS mapping.
Click the drop-down menu to select the CoS type
Click Apply to save the values and update the screen.
Figure 4.90 QoS > General > DSCP Mapping
Description
Enter the DSCP entry to define the precedence values.
Click the drop-down menu to select the queue designation for the
DSCP value.
Displays the queue value for the DSCP map.
Enter the DSCP entry to define the precedence values.
Click Apply to save the values and update the screen.
90