Figure 4.100 Management > Lldp > Lldp Port Settings > Lldp Port Configuration; Figure 4.101 Management > Lldp > Lldp Port Settings > Optional Tlvs Selection - Advantech EKI-7428 Series User Manual

4.9.1.2 LLDP Port Settings
The LLDP Port Settings page allows you to configure the state (enabled or disabled)
of the selected port.
To access this page, click Management > LLDP > LLDP Port Settings.
Figure 4.100 Management > LLDP > LLDP Port Settings > LLDP Port
The following table describes the items in the previous figure.
Item
Port Select
State
Apply
Figure 4.101 Management > LLDP > LLDP Port Settings > Optional TLVs
The following table describes the items in the previous figure.
Item
Port Select
Optional TLV Select
Apply
The ensuing table for LLDP Port Status settings are informational only: Port, State
and Selected Optional TLVs.
Configuration
Description
Enter the port number associated with the LLDP setting.
Click the drop-down menu to select the LLDP port state.
Click Apply to save the values and update the screen.
Selection
Description
Enter the port number associated with the TLV (optional) selection.
Click the drop-down menu to select the LLDP optional TLVs to be
carried (multiple selections are allowed).

System Name: To include system name TLV in LLDP frames.

Port Description: To include port description TLV in LLDP
frames.

System Description: To include system description TLV in LLDP
frames.

System Capability: To include system capability TLV in LLDP
frames.

802.3 MAC-PHY:

802.3 Link Aggregation:

802.3 Maximum Frame Size:

Management Address:

802.1 PVID:
Click Apply to save the values and update the screen.
97 EKI-7428 Series User Manual