Table of Contents
Advertisement
FINAL GEAR CASE REMOVAL
After draining final gear oil, the following components must be
removed in the described order before removing the final gear
case.
• Drain final gear oil. ("2-19)
• Remove the rear wheel. ("9-34)
• Remove the final gear case nut, spring washer and final gear
case 1.
FINAL GEAR CASE DISASSEMBLY
• Remove the plate 1.
• Remove the dust seal 2.
• Remove the snap ring 3.
# 09900-06108: Snap ring pliers
DRIVELINE/AXLE
4-15
- Quick Links:
- Fuel + Oil
Hide quick links:
Advertisement
Chapters
Table of Contents
Troubleshooting
