Roll Paper Options Dialog Box; Size Options Dialog Box - Canon imagePROGRAF iPF6450 User Manual

Roll Paper Options Dialog Box

Roll Paper Options Dialog Box

Roll Paper Options Dialog Box
This dialog box appears when you click the Roll Paper Options button on the Page Setup Sheet. You can set the roll
paper width and perform the auto cut settings.
• Roll Paper Width
This selects the width of the roll media set to the printer.
• Automatic Cutting
You can set the printer to cut roll paper automatically or print a guideline for cutting.
The following settings are available for automatic cutting.
Available
None
Print Cut Guideline
• No Spaces at Top or Bottom (Conserve Paper)
When you place a checkmark here, the print data is printed without margins.

Size Options Dialog Box

Size Options Dialog Box

This dialog box appears when you click the Size Options button on the Page Setup Sheet. You can select a media
name, size and other settings.
• Paper Size List
Displays all the standard sizes and custom media sizes.
• Custom Paper Size Name
You can enter any name up to 63 characters.
• Units
You can select the units of measure to use when you define custom media size. Switching this setting resets the
units of measure for the entire Plug-In.
282
• Paper Size
Width
Setting
Each page is automatically cut after it is printed.
Each page is not cut after it is printed and printing continues without interruption.
A print cut guideline is printed after each page and printing continues without interruption.
Details
iPF6450
User's Guide