Roll Paper Options Dialog Box; Size Options Dialog Box - Canon iPF8400S User Manual

Hide thumbs Also See for iPF8400S:

Table of Contents

The proof options consist of the following settings.

Simulate Paper Color

Simulate Black Ink

Roll Paper Options Dialog Box

This dialog box appears when you click the Roll Paper Options button on the Page Setup Sheet. You can set the

roll paper width and perform the auto cut settings.

Roll Paper Width

This selects the width of the roll media set to the printer.

Automatic Cutting

You can set the printer to cut roll paper automatically or print a guideline for cutting.

The following settings are available for automatic cutting.

Print Cut Guideline

No Spaces at Top or Bottom (Conserve Paper)

When you place a checkmark here, the print data is printed without margins.

This dialog box appears when you click the Size Options button on the Page Setup Sheet. You can select a me-

dia name, size and other settings.

Paper Size List

Displays all the standard sizes and custom media sizes.

Custom Paper Size Name

You can enter any name up to 63 characters.

You can select the units of measure to use when you define custom media size. Switching this setting resets

the units of measure for the entire Plug-In.

User's Guide

Select this when performing paper color simulation. When this is on, Simulate Black Ink is

automatically turned on and becomes grayed out.

Select this when performing simulation of black ink. In order to enable this setting, Adobe

CMM needs to be selected under Conversion Engine.

Each page is automatically cut after it is printed.

Each page is not cut after it is printed and printing continues without interruption.

A print cut guideline is printed after each page and printing continues without interruption.

Roll Paper Options Dialog Box

Show Quick Links

Table of Contents