Paper Detailed Settings Dialog Box - Canon iPF6300 User Manual

Windows Software
A
Paper Source
Shows the paper source supported by the printer, as well as information about the loaded paper. To update the paper
source and media type settings in the printer driver, select the desired Paper Source option and click OK.

Paper Detailed Settings Dialog Box

The Paper Detailed Settings dialog box offers the following settings. For details on settings items, refer to the printer
driver help.
4
Note
• To display the Paper Detailed Settings dialog box, on the Main sheet, click Settings by Media Type.
(See " Main Sheet
A
Drying Time
Specify the time that the printer waits for ink to dry, as needed. The Drying Time setting is only valid for rolls.
• (See " Specifying the Ink Drying Time for Rolls
B
Between Pages
Specify the time the printer waits after printing a page until ejecting the paper, as needed.
C
Between Scans
Specify the time the printer waits after printing a line on the page until printing the next line, as needed.
200
D
Roll Paper Margin for Safety
You can specify the length of a margin on the leading edge of paper to ensure that paper susceptible to curling is held
firmly against the Platen.
E
Near End Margin
Specify the length of the Near End Margin (the leading edge margin) of the roll, as needed.
F
Cut Speed
Select the speed of automatic cutting, as needed. You can adjust this setting if paper is not cut well when automatic
cutting is used.
Paper Detailed Settings Dialog Box
> Printer Driver >
")
→P.196
")
→P.684
iPF6300