Cutting Roll Paper After Printing - Canon TX-3000 Online Manual

Cutting Roll Paper after Printing

The procedure for cutting roll paper automatically and printing cut guidelines is as follows:
1. Select Page Processing from the pop-up menu of the
2. Setting Auto Cut
From Automatic Cutting, select the setting that matches your purpose.
Yes
The roll paper is cut automatically after printing.
None
The roll paper is not cut after printing.
Print Cut Guideline
Cut guidelines are printed for cutting the roll paper manually after printing.
Note
• The default setting for automatic cutting is Yes.
3. Complete the setup
Click Print.
When you print, the roll paper is cut automatically after printing or cut guidelines are printed.
Print Dialog
607