Table of Contents
Advertisement
Switching the Paper Source to Match the Purpose
This printer has two paper sources: Roll and Cut Sheet.
You can facilitate printing by selecting a paper source setting that matches your media type or purpose.
The procedure for setting paper source is as follows:
1.
1. Open the
printer driver setup window
2.
2. Select the media type
Select the type of paper loaded in the printer from the Media Type list on the Main tab.
3. Select the paper source
3.
From the Paper Source list on the Page Setup tab, select the paper source that matches your purpose.
Roll Paper
Feeds paper using roll paper.
Cut Sheet
Feeds paper using the cut paper.
4. Complete the setup
4.
Click OK.
When you execute print, the printer uses the specified paper source to print the data.
Note
• If the paper settings in the printer driver differ from the paper information registered on the printer,
an error message may appear on the printer's operation panel. You can still print but you may not
be able to obtain correct print results.
472
Advertisement
Table of Contents
Troubleshooting
