Switching The Paper Source To Match The Purpose - Canon PRO-500 Series Online Manual

Switching the Paper Source to Match the Purpose

In this printer, there are two paper sources, a manual feed tray and a rear tray.
You can facilitate printing by selecting a paper source setting that matches your media type or purpose.
The procedure for setting paper source is as follows:
You can also set the paper source on the Quick Setup tab.
1. Open the printer driver setup window
2. Select the media type
Select the type of paper loaded in the printer from the Media Type list on the Main tab.
3. Select the paper source
From the Paper Source list, select the paper source that matches your purpose.
Manual Feed
Paper is supplied from the manual feed tray in the back.
Important
• When A5, B5, 4"x6" 10x15cm, 5"x7" 13x18cm, L 89x127mm, 2L 127x178mm, Hagaki
100x148mm, or Hagaki 2 200x148mm is selected for Page Size on the Page Setup tab,
paper cannot be supplied from the manual feed tray in the back.
• When Plain Paper, Hagaki A, Ink Jet Hagaki, or Hagaki is selected for Media Type on the
Main tab, paper cannot be supplied from the manual feed tray in the back.
Rear Tray
Paper is fed from the rear tray.
Important
• When Photo Paper Pro Premium Matte, Heavyweight Photo Paper, Extra Heavyweight
Fine Art Paper, or Highest Density Fine Art Paper is selected for Media Type on the Main
tab, paper cannot be supplied from the rear tray.
389