Printing By Automatically Switching Upper-Level And Lower-Level Roll Papers - Canon imagePROGRAF PRO-6600 Online Manual

Printing by Automatically Switching Upper-level and Lower-
level Roll Papers
You can print by automatically switching Roll Paper 1 and Roll Paper 2 depending on the print job.
The procedure for printing by automatically switching Roll Paper 1 and Roll Paper 2 is as follows:
1. 1. Select the paper size from the
For the Paper Size, select the same size as the source document created by the application software.
2. 2. Select Quality & Media from Printer Options
3. 3. Select the media type
For Media Type, select the same paper type loaded in the printer.
If Auto (Use Printer Settings) is selected, the paper configured in printer settings is printed.
Important
• If the lower roll unit is not loaded or if the roll unit that was set as the take-up unit is loaded, the roll
paper cannot be switched automatically.
4. 4. Select the paper source
For Paper Source, select Roll Paper (Auto).
Important
• The paper feed method will differ depending on the lower level (roll paper 2) settings or roll unit
option settings.
5. Select Page Processing from Printer Options 5.
6. 6. Selecting Roll Paper Width
For Roll Paper Width, select the width of the roll paper loaded in the printer.
Print Dialog
124