Printing By Automatically Switching Upper-Level And Lower-Level Roll Papers - Canon imagePROGRAF GP-4000 Online Manual

Printing by Automatically Switching Upper-level and Lower-
level Roll Papers
You can print by automatically switching Roll Paper 1 and Roll Paper 2 depending on the print job.
The procedure for printing by automatically switching Roll Paper 1 and Roll Paper 2 is as follows:
1. Select the paper size from the 1.
For the Paper Size, select the same size as the source document created by the application software.
2. Select Quality & Media from the pop-up menu 2.
3. Select the media type 3.
For Media Type, select the same paper type loaded in the printer.
Important
• If the lower roll unit is not loaded or if the roll unit that was set as the take-up unit is loaded, the roll
paper cannot be switched automatically.
4. 4. Select the paper source
For Paper Source, select Roll Paper (Auto).
Important
• The paper feed method will differ depending on the lower level (roll paper 2) settings or roll unit
option settings.
Print Dialog
478