Commissioning; Local Commissioning; Activating Sitrans Lut400 - Siemens SITRANS LUT400 Series Operating Instructions Manual

Commissioning

Local Commissioning

SITRANS LUT400 is an easy to use, and quick to commission device, with its numerous
wizards, and menu driven parameters. The parameters can be modified locally using the
LCD and the local push buttons, also known as the Local User Interface (LUI).
A Quick Start Wizard provides an easy step-by-step procedure to help you configure the
device for a simple application. We recommend that you configure your application in the
following order:
• First, run the appropriate Quick Start Wizard for your application (Level, Volume,
Flow).
• Next, setup pumps via the Pump Control Wizard (if applicable).
• Lastly, configure alarms, or other controls, totalizers and samplers, referencing the
respective parameters [see
that alarms, and other controls are configured last to avoid pump relay assignments
being overridden by the Quick Start Wizard.
There are two ways to access the Quick Start wizards:
• locally (see
• from a remote location (see
Level Application Example
See
illustrations, and for the complete range of parameters, see
page 137.

Activating SITRANS LUT400

Notes:
• Program Mode and Measurement mode refer to the display only. While the device is
in Program mode, the output remains active and continues to respond to changes in
the device.
• To enter Program mode using the device local push buttons, press
return to Measurement mode.
• The display will return to Measurement mode after ten minutes of inactivity (from
last button press), when in Program Mode and from within a Wizard. Pressing
then take you to the main navigation menu. (It will not return to the screen from
which the timeout occurred.)
A5E33329501 SITRANS LUT400 (HART) – OPERATING INSTRUCTIONS
SITRANS LUT400
Parameter reference (LUI)
Quick Start Wizards via LUI
Other Quick Start Wizards (QSW):
on page 58, or
local push buttons
on page 137]. It is important
on page 38)
Flow application example
Parameter reference (LUI)
on page 38)
on page 59 for
on
. Press to
will
Page 33