Activating Easy Message - Siemens SINUMERIK 828D Operating Manual
Hmi sl milling
Hide thumbs
Also See for SINUMERIK 828D:
- Function manual (1799 pages) ,
- Commissioning manual (1167 pages) ,
- Operating manual (926 pages)
Table of Contents
Advertisement
Easy Message
16.2 Activating Easy Message
Calling the SMS Messenger
16.2
Activating Easy Message
To commission the connection to the modem for the SMS Messenger, activate the SIM card
at the initial start-up.
Requirement
The modem is connected.
Procedure
Activating the SIM card
Activating a new SIM card
432
1.
Select the "Diagnostics" operating area.
2.
Press the "Easy Msg." softkey.
1.
Press the "Easy Msg." softkey.
The "SMS Messenger" window appears.
"Status" shows that the SIM card has not been activated with a PIN.
2.
Enter the PIN, repeat the PIN and press the "OK" softkey.
3.
If you made an incorrect entry several times, enter the PUK code in
the "PUK Input" window and press the "OK" softkey to activate the
PUK code.
The "PIN input" window is opened and you can enter the PIN number
as usual.
1.
Press the "Easy Msg." softkey.
The "SMS Messenger" window appears.
"Status" shows that the connection to the modem has not been
activated.
2.
Press the "Settings" softkey.
3.
Press the "Delete PIN" softkey to delete the stored PIN.
Enter the new PIN in the "PIN Input" window at the next power up.
Operating Manual, 06/2009, 6FC5398-7CP20-0BA0
HMI sl Milling
Advertisement
Table of Contents
