Table 2-48 Voip Resource Chart - NEC Univerge SV8100 Features And Specifications Manual

Hide thumbs Also See for Univerge SV8100:

Table of Contents

UNIVERGE SV8100

When using Netlink and UCB, the trunks and extensions on the remote sites are supported

for UCB (Version 2.51 or higher).

When using Mobile Extension in a NetLink Network, the ISDN/PRI must be used in the

Primary System.

InMail is not supported in a NetLink network.

When using Set Relocation, and a terminal is re-located from one physical system to

another physical system, route programming must be made accordingly for 911 calls.

If IPKII migration is used in a NetLink environment, it must be the primary system.

FoIP (Fax over IP) is supported in a NetLink Network.

S1 = Secondary System #1

S2 = Secondary System #2

The number of conference blocks in a NetLink network is the same as a stand-alone

Invalid data is displayed in the LCD of the terminal if Program 51-01 is enabled and a

PZ-ME50-US is not installed.

Restrictions:

All IP Trunks and IP Terminals must be connected to the Primary System.

The number of total ports depends on the Primary System.

System ID (Program 51-01-02) must be unique for each system in a NetLink network.

SV8100 NetLink

Table 2-48 VoIP Resource Chart

Primary System