Netlink Communication Port Settings - NEC Univerge SV8100 Programming Manual

UNIVERGE SV8100
Level:
IN
Description
Use Program 51-09 : NetLink Communication Port Settings to set the various
communication ports used on the system.
Input Data
Item
No.
Programming Manual

51-09 : NetLink Communication Port Settings

01
Primary Waiting Port
Sets the communication port that the Primary system
uses to communicate with the Secondary system.
02
Communication Waiting Port
Port used to communicate between nodes. It is always
opened by all nodes.
03
Secondary Communication Port
Secondary system communicates with Primary system at
this port number. If 0 is specified, temporary port is
selected by dynamic.
04
Primary Search Port
When Fail-Over occurred, each system communicates
with other system at this port number.
If 0 is set, temporary port is selected by dynamic.
If 0 is not specified, the number and continuous maximum
50 number is used.
(Ex. 5000 is specified 5001, 5002...5049 will be used).
05
Primary Detection Port
Enter port number to seek the Top Priority Primary
system.
If 0 is specified, temporary port is selected by dynamic.
06
Database Replication Communication Listening
Port
This port is used to replicate database.
07
Database Replication Primary Detection Port
This port is used to replicate database.
If 0 is specified, temporary port is selected by dynamic.
Program 51 : NetLink Service
Item
Issue 10.1
Input Data Default
58000
0~65535
0~65535 58001
0~65535 0
0~65535 0
0
0~65535
58002
0~65535
0~65535 0
2 - 653