Netlink Communication Port Settings - NEC UNIVERGE SV8100 Programming Manual

Issue 11.0
Level:
IN
Description
Use Program 51-09 : NetLink Communication Port Settings to set the various
communication ports used on the system.
Input Data
Item
No.
01
02
03
04
05
06
2 - 644

51-09 : NetLink Communication Port Settings

Item
Primary Waiting Port
Set the communication port that the Primary
system uses to communicate with the
Secondary system.
Communication Waiting Port
Select port used to communicate between
nodes. It is always opened by all nodes.
Secondary Communication Port
Secondary system communicates with Primary
system at this port number. If 0 is specified,
temporary port is dynamically selected.
Primary Search Port
When Fail-Over occurs, each system
communicates with other system at this port
number.
If 0 is set, temporary port is dynamically
selected.
If 0 is not specified, the number and continuous
maximum 50 number is used.
(Ex. 5000 is specified 5001, 5002...5049 are
used).
Primary Detection Port
Enter port number to seek the Top Priority
Primary system.
If 0 is specified, temporary port is dynamically
selected.
Database Replication Communication
Listening Port
Use this port to replicate database.
Program 51 : NetLink Service
Input Data
0~65535
0~65535
0~65535
0~65535
0~65535
0~65535
Program 51 : NetLink Service
UNIVERGE SV8100
Default
58000
58001
0
0
0
58002