External Speaker Chime Selection - NEC Xen IPK Programming Manual

December 2004
External Speaker Chime
Selection
General Description
Use this Memory Block to determine whether paging alert tone (4 tones) or alert chime sounds
before the speech path is established, or after, or before and after.
Display
Data
No.
0 8 : S P K
T I M E
Settings
LK 1 LK 2
PRT C-S
LK 5 LK 6
PRT = Normal Paging Tone Before the Page
C-S = Chime - Start Only (4 Tone Chime)
C-B = Chime - Both Start and End (4 Tone Chime)
Programming Procedures
1 Go off-line.
2 Press LK1 + LK7 +
KH
Press the corresponding CO/PBX line key to change the data option.
3
LK - On = Enabled
LK - Off = Disabled
N
4 Press to write the data.
P
5 Press to go back on-line.
Related Programming
M.B. Number
1-7-03 External Paging Alert Tone Selection
1-7-09 External Speaker Chime Start Time Selection
N
Memory Block 1-7-03 External Paging Alert Tone Selection must be enabled before this Memory Block has any affect.
DRAFT 3
214 – Chapter 1
Setting
Title Data
O N P R T
D I S P L A Y
LK 3 LK 4
C-B
The shaded area indicates
the default setting.
LK 7 LK 8
to access the Memory Block.
Memory Block Name

External Speaker Chime Selection, 1-7-08

NEC Business Solutions Ltd
1-7-08
System Mode
1
Submode
7
Data No.
08
PC Programming
+ BP