NEC Xen IPK Programming Manual page 25

Xen IPK
Programming Manual
When the PBR is in use:
• Memory Block 1-8-01 (SLT or Automated Attendant/DISA to
PBR Selection)
• Memory Block 1-8-02 (PBR Receive Level Assignment for
Automated Attendant/DISA)
2.5 Programming Methods
2.5.1 Initialising the System
Turn the new Key Service Unit (KSU) power supply on.
After 30 seconds, the system operates with the system
default values.
2.5.2 Using the Multiline Terminal for Programming
System programming can be performed using a display type
Multiline Terminal that is connected to station ports 01 or 02.
Refer to Figure 1-2: Xen IPK Multiline Terminal
Flexible Line Keys
Recall Key
Conference Key
Dial Keys
Hold Key
Transfer Key
Figure 1-2: Xen IPK Multiline Terminal
DRAFT 3
Display (LCD)
Exit Key
Redial Key
Speaker Key
Answer Key
Programming Manual
Message
Waiting LED
Help Key
Softkeys
Directory Key
Message Key
Feature Key
MIC Key
Chapter 1 – 5