NEC Xen IPK Programming Manual page 106

December 2004
N
Example:
To assign System 1 in System Programming:
1. Memory Block 1-1-46 Access Code (1-Digit) Assignment. Assignment 2
2. Memory Block 1-1-49 Networking Trunk Group/Route Advance Assignment. Assignment Block 01
Group 02).
3. Memory Block 1-1-50 CO/PBX Outgoing Digit Add Assignment. Assignment Block 01
4. Digits are added when the Access Code is dialled from the internal dial tone.
5. This Memory Block also applies to ISDN trunks.
DRAFT 3
86 – Chapter 1
Station 100
Dials 200
Add
200
Xen IPK Xen IPK
System
System
Trunk
Group 02
→
CO/PBX Outgoing Digit Add Assignment, 1-1-50
NEC Business Solutions Ltd
Station 200 Rings
401 (Closed Number Block 01).
→
102 (Trunk
→
Assign 2