Receiving Internal/All Call Page Selection - NEC Xen IPK Programming Manual

Xen IPK
Receiving Internal/All Call
Page Selection
General Description
Use this memory block to enable/disable (per station) receiving an Internal Zone or Internal All
Zone Page.
Display
Tel Port No.
(01~99) Data
A0~C0 No.
0 1 / 3 1 : P A G I N G
T I M E
Settings
LK 1 LK 2
Ys No
LK 5 LK 6
Programming Procedures
1 Go off-line.
2 Press LK4 + to access the Memory Block.
CA
3 Press the corresponding CO/PBX line key to change data option.
N
4 Press to write the data.
P
5 Press to go back on-line.
Related Programming
No related programming is necessary for this Memory Block.
N
1. Internal Emergency All Call Page and Internal Paging by Tenant Group overrides this Memory Block. Refer to
Memory Block , 1-1-46 , Access Code (1-Digit) Assignment.
2. Telephone ports A0~C0 are ports 100~120.

4-31, Receiving Internal/All Call Page Selection

Setting
Title Data
Y S
D I S P L A Y
LK 3 LK 4
The shaded area indicates
the default setting.
LK 7 LK 8
Programming Manual
4-31
System Mode
4
Submode
—
Data No.
31
PC Programming
+ BTT
DRAFT 3
Chapter 1 – 437