Intercom Master Hunt Number Forward Assignment - NEC Xen IPK Programming Manual

Xen IPK
Intercom Master Hunt
Number Forward Assignment
General Description
Use this Memory Block to specify a telephone to ring when a Master Hunt Number specified in
Memory Block , 4-14 , Intercom Master Hunt Number Selection is busy.
Display
Tel Port
No.
Data
(01~99)
No.
A0~C0
0 1 / 1 5 :
T I M E
Programming Procedures
Go off-line.
1
2 Press LK4 + AE to access the Memory Block.
3 Use dial pad to enter data. To set Tel. Port No. 01 to forward station number 300,
enter 300.
Note: Use the following to enter data:
J
to move the cursor left
L to move the cursor right
K ~ I to enter numeric data
U
clear data when cursor is at setting data
R
to move to the next Tel Port No.
Setting Data Forward Station Number is one of the following :
:
• 2 digit (00 ~ 99)
• 3 digit (000 ~ 999)
• 4 digit (0000 ~ 9999)
N
4 Press to write the data.
P
Press to go back on-line.
5
Related Programming
M.B. Number
4-14 Intercom Master Hunt Number Selection
N
Telephone ports A0~C0 are ports 100~120.

4-15, Intercom Master Hunt Number Forward Assignment

Setting
Title Data
I C M F W D
D I S P L A Y
Memory Block Name
Programming Manual
4-15
System Mode
4
Submode
—
Data No.
15
PC Programming
+ BTT
Default Values
All Telephones Not Specified
DRAFT 3
Chapter 1 – 423