NEC Xen IPK Programming Manual page 200

December 2004
N
1. Function 011 (Bypass Automated Attendant) uses Memory Blocks , 4-01 , CO/PBX Ring Assignment (Day Mode) and
, 4-02 , CO/PBX Ring Assignment (Night Mode) to ring according to those assignments.
2. Functions 015~016 (Ring Internal Paging Zone A/B/C) require assigning the following to ring the desired station:
Memory Block 4-01 [CO/PBX Ring Assignment (Day Mode)]
Memory Block 4-02 [CO/PBX Ring Assignment (Night Mode)]
Memory Block 4-93 (Internal Zone Paging Selection).
3. If a caller receives a busy signal after being transferred by the Automated Attendant, the following Fixed Access
Codes apply:
A
Step Call
J Receive a second dial tone
L CO rings based on Day/Night Ring Assignment
Function
Code
000 Unregistered
001 Automatic Attendant Message (1)
Automatic Attendant Message (2)
002
003
Automatic Attendant Message (3)
004 Automatic Attendant Message (4)
005 Automatic Attendant Message (5)
Automatic Attendant Message (6)
006
Automatic Attendant Message (7)
007
008 Automatic Attendant Message (8)
009
010 Internal Number (Station Number)
011 Bypass Automated Attendant
012
013
014
015 Paging Zone A Call
016 Paging Zone B Call
017 Paging Zone C Call
018
019
DRAFT 3
180 – Chapter 1
1-Digit Access Codes
Contents
Automated Attendant Message Access Code (1-Digit) Assignment, 1-4-14
Function
Code
027
028
029
030 Specified Station Call (00). Refer to
Memory Block 1-2-08 (Specified Station
Access Code Assignment)
031 Specified Station Call (01)
032 Specified Station Call (02)
Specified Station Call (03)
033
Specified Station Call (04)
034
035 Specified Station Call (05)
036 Specified Station Call (06)
037 Specified Station Call (07)
038 Specified Station Call (08)
Specified Station Call (09)
039
040 Specified Station Call (10)
041 Specified Station Call (11)
042 Specified Station Call (12)
043 Specified Station Call (13)
044 Specified Station Call (14)
Specified Station Call (15)
045
046 Specified Station Call (16)
NEC Business Solutions Ltd
Contents