Section 1 General Information - NEC Xen IPK Programming Manual

Guide to Feature
Programming
SECTION 1
GENERAL
INFORMATION
SECTION 2
PROGRAMMING
GUIDE TABLES
Section 1, General Information
This chapter provides a roadmap for programming the features for the Xen
IPK systems. The Programming Xen IPK System Guide Tables provide
information helpful to the technician when programming the systems.
The tables provided in this section are useful as a quick reference when
programming the Xen system. The tables are listed alphabetically by
feature name. For each feature, information for accessing the programming
blocks using PC Programming or Multiline Terminal programming is listed.
The Keyboard Shortcut is used to access the Memory Blocks via PC
Programming. The Memory Block Number is used to access the Memory
Block via Multiline Terminal Programming.
All Memory Blocks associated with the feature are listed in the table. Some
Memory Blocks must be programmed before a feature can be used. Other
Memory Blocks are optional, but can affect how the feature operates. The
Memory Blocks that must be programmed are indicated with the following
symbols in the table.
When the system is at default this Memory Block must be programmed
for the feature to be used.
At least one of the listed Memory Blocks must be programmed before
the feature can be used.
Chapter 2
DRAFT 3
Chapter 2 – 547