Caller Name Indication Selection - NEC Xen IPK Programming Manual

December 2004
Caller Name Indication
Selection
General Description
When an Caller ID number is detected, the IPK system can check the speed dialling buffer
for a match. When a name is assigned to a matched number, the name can be displayed,
when allowed by this assignment
Display
CO/PBX
No.
Data
(01~64)
No.
0 1 / 5 3 :
T I M E
Settings
LK 1 LK 2
NO NUM
Programming Procedures
1 Go off-line.
N
2 Press LK3 + +
3 Press the corresponding CO/PBX line key to change the data option.
Note: Use the following to enter data:
J
to move the cursor left
L to move the cursor right
K I
~ to enter numeric data or CO/PBX No.
– OR –
R
to go to the next assigned CO/PBX Line No.
Settings Include:
NO Disables caller name display.
NUM Displays Caller ID presented from the network.
NAMSelected when system speed dial buffers are assigned a name; the name is displayed when it is assigned to a
matched number and Caller ID number matches the speed dial number.
TRK Selected if you want the trunk name or number to display when data is assigned in Memory Block 3-00 (Trunk Name/
Number Assignment).
N
Press to write the data and display the next Memory Block.
4
5 Program the next Memory Block or press
Related Programming
M.B. Number
Refer to individual features in the Xen IPK Features and Specifications manual.
DRAFT 3
386 – Chapter 1
.
Title Setting Data
I S I N D N U M
D I S P L A Y
LK 3 LK 4
NAM
EC to access the Memory Block.
P
to go back on-line, after all data is written.
LK 5 LK 6
TRK
Memory Block Name
NEC Business Solutions Ltd
System Mode
Submode
Data No.
PC Programming
LK 7 LK 8 The shaded area
indicates the
default setting.

Caller Name Indication Selection, 3-53

3-53
3
—
53
+ AI