NEC Xen IPK Programming Manual page 312

December 2004
Related Programming (Continued)
M.B. Number
1-15-13 Centralised Day/Night Switching for Remote Office Assignment
1-15-14 Centralised Day/Night Switching for Main Office Assignment
1-15-15 Centralised BLF Send Point Code Assignment
1-15-16 Centralised BLF Send Extension Number Assignment
1-15-17 Centralised BLF Send Time Assignment
1-15-18 Centralised BLF Display Extension Number Assignment
3-70 CIC Number Assignment
5-05 Common Signalling Channel Route Selection
1-1-05 Start Time Selection
1-5-02 SMDR Print Format
1-5-13 Printer Connected Selection
1-5-14 Printer Line Feed Control Selection
1-5-25 SMDR Valid Call Time Assignment
1-5-26 SMDR Incoming/Outgoing Print Selection
1-8-35 COM Port Baud Rate Setting Assignment
4-56 SMDR Telephone Print Selection
N
For Xen IPK to Xen IPK Network only one system can be set for Main. All other systems must be set from
1.
Remote
2. When connected to a PBX, the Xen IPK must be set for REMOTE in this Memory Block.
3. When this Memory Block is set to NONE, K-CCIS does not function even when all other K-CCIS Memory Blocks are
allowed.
4. The Main or Remote setting only applies to the Centralised Day/Night Mode Change - K-CCIS feature and only when
using traditional K-CCIS with point-to-point T1 lines.
This Memory Block is not used and has no effect on the IP (K-CCIS) feature.
DRAFT 3
292 – Chapter 1
.
Memory Block Name
K-CCIS Main/Remote Office Selection, 1-15-00
NEC Business Solutions Ltd