NEC Xen IPK Programming Manual page 33

Xen IPK
LK 1 System Mode
LK 1 CO Line (Continued)
Data
Memory Block Name
No.
86 Call Monitoring Alert Assignment
LK 1 System Mode
LK 2 ICM
Data
Memory Block Name
No.
00 Internal Paging Timeout Selection
01 Intercom Call Voice/Tone Signal Selection
02 Automatic Callback Release Timer
Selection
03 2-, 3-, or 4-Digit Station Number Selection
04 Call Arrival Key Block Assignment
08 Specified Station Access Code
Assignment
09~18 Customised Message 1~10 Assignment
19 Intercom Ring Pattern Selection
20 Intercom Ring Tone Selection
21 PHS Telephone Assignment
22 Call Forward No Answer Timer Selection
23 System Call Park Recall Time Selection
24 Intercom Feature Access
Code Assignment
25 Internal Paging Alert Tone Selection
26 Delayed Ringing Timer Assignment (ICM)
28 PS Out of Area Tone Selection
30 PS Out of Area Timer Selection
(BSU only)
Programming Manual
Default Value
Default Value
90 sec.
Tone
30 min.
3-digit
Not specified
00 = 01
01 ~ 23 Not Set
09 = Don't Disturb
10 = Meeting
11 = Business Trip
12 = Not In
13 = With Guest
14 = Out of Office
15~18 = Not Specified
Pattern B
Tone A
Not specified
8 sec.
1 min.
Refer to Intercom Feature Access Code Assignment on page 1-146.
Tone YS
10 sec.
BT
12 sec.
DRAFT 3
Programming Manual
Programming Values
Programming Values
90 sec., 120 sec., No Limit
Tone, Voice
30 sec., 1 min., 2 min., 3 min., 5 min., 10 min.,
20 min., 30 min.
2-digit, 3-digit, 4-digit
Tel Port No. Blocks
(4 Ch Assign)
Tel. Port Number
Maximum of 13 characters.
(Refer to Section 7 Character Code Tables on
page 1-541 for a list of characters.)
Tone Off
Tone On
Patterns A~H
Tones A~H
NON, PHS, Tel No., Tel No.
4 sec., 8 sec., 12 sec., 18 sec., 24 sec., 30
sec., 60 sec.
0.5 min., 1.0 min., 1.5 min., 2.0 min., 3.0 min.,
5.0 min., 8.0 min., 10.0 min.
Tone YS
Tone No
00~99
BT (Busy), RBT (Ring Back)
00~99 sec.
Chapter 1 – 13