Manual Pause Selection - NEC Xen IPK Programming Manual

Xen IPK

Manual Pause Selection

General Description
Use this Memory Block to specify either Pause Insertion or Last Number Dialled/Speed Dial to
be executed using the Redial key if it is pressed after one or more digits of a dialled number
are entered.
Display
Data
No.
0 9 : M A N
T I M E
Settings
LK 1 LK 2
No Yes
LK 5 LK 6
Programming Procedures
1 Go off-line.
2 Press LK1 + LK1 + KI
3 Press the corresponding CO/PBX line key to change the data option.
N
Press to write the data.
4
P
Press to go back on-line.
5
Related Programming
M.B. Number
1-1-00 Hookflash Time Selection
N
1. When a user seizes a CO/PBX line and dials the following sequence without a manual pause (this Memory Block is
set to No),
907 4000 +
the system interprets the sequence as:
9074000XXX345 (XXX =
When a user seizes a CO/PBX line and dials the following sequence with a manual pause (this Memory Block is set
to Yes),
907 4000 +
the system interprets the sequence as:
9074000XXX12345 (XXX = is interpreted as a pause).
2. The pause is inserted if Last Number Redial, Save and Repeat, or Store and Repeat is used to redial the number.
3. When this feature is allowed, Multiline Terminal users cannot use consecutive Speed Dial using
1-1-09, Manual Pause Selection
Setting
Title Data
P A U S E N O
D I S P L A Y
LK 3 LK 4
The shaded area indicates
the default setting.
LK 7 LK 8
to access the Memory Block.
Q
+ 12345
Q
and 12 are interpreted as Speed Dial buffer 12).
Q
+ 12345
Memory Block Name
Programming Manual
1-1-09
System Mode
1
Submode
1
Data No.
09
PC Programming
+ BTS
Q
.
DRAFT 3
Chapter 1 – 43